Skill Test Schedule

 

skill eps

Announcement of Schedule for SKILL TEST (2nd round) EPS/Point System

              Please Type Your KLT Number in Below Search Box and Press FIND

Skill Test Note

 

 

Skill Test Details

 Information SKT

Implementation of the 2nd round of

Test of Point System

Passers at the first round of test will get a chance to take the second round of test which are skills test, competency test, EPS-TOPIK and the scores of these tests will add up which will be the base for the recruitment. For competency test, one who got no experiences, certificates or diploma, job training wont have to submit any documents. However it is a must candidates take the skills test and the one who is not registered and didnt take the test will be eliminated in the roster.

n  Register skills test & submit documents for competency test

  1. Register skills test :  The first round passers are registered automatically
  2. Documents needed for the competency test

Points distribution for competency test: Total 5 pts

Who needs to submit documents: The one who passed EPS-TOPIK and have relevant job experiences and certificates, academic background, vocational training completion of what he/she is applying for.

No need to submit any documents if theres none.

Date of Registration : Jun. 11~Jun13, 2018for 3 days

※ Registration Hours : 08:00~14:00

Place: OEC Head Office, Islamabad

Howby visiting

Items to prepare: Passport, Examinees admission ticket(KLT)

Registration feeFree

Documents neededOne can download the application form at the OEC web page

- Relevant  experiences:One should get an Employment verification  from the company one is not in anymore (for each one), One can use for the verification of the documents. If it is hard to get any documents that can verify your employment history from the company due to shut down, bankruptcy, or private employment. One can make his/her own form of paper with two other persons sign on it.(attach a contract)

Training course relevant to the industry one is applying for: certificate(copy) itself and applicants must submit original certificate when they attend the test of 2nd round.

- College (university) Graduation  relevant to the industry one is applying for: certificate(copy) itself and applicants must submit original certificate when they attend the test of 2nd round.

Certificates: certificate(copy) itself and applicants must submit original certificate when they attend the test of 2nd round (issued by Country or Governmental organization)

Documents will be examined three times in the process of competency test and if it is proven to be falsified in any way, test he/she has already taken is void and one can’t take the exam for 3 years.(one who haven’t been truthful with the documents could possibly see the consequence).

n  Announcement of Test venue & date

Announcement dateJuly11, 2018

Find the time & location atOEC website www.oec.gov.pk

Date of the skills test(planned): July17~July 22,2018for 6 days

To help you understand your Skills test scores, scoring guide will be posted.

n  Implementation of Skills test

Date of the skills test(planned): July. 17~July 22,2018for 6 days

Session

Time

Session1

08:00

Session2

12:00

 You cannot reschedule your test date & venue and please remind that the person who arrives later than stated time will not be able to take the test.

 Documents submitted for the competency test will be verified again when interviewing for skills test. If document is proven to be falsified, test will be null and void and person will not be able to take the test for 3 years. (Person will be reported to the authorities)

nResult notifications

 Date: August 3, 2018(Fri)

- View your test scores online: Access EPS homepage (supports multi language) and create your account to view your test scores

- Valid period of the results: 2 years from the date of the announcement

(August. 3, 2018 ~August. 2, 2020)

nComposition of the 2nd round of test

Industry

Score

EPS-

TOPIK

Skills test

Competency test(Adding Points)

Total

Experienced

One who completed vocational training course

Or

College graduation

One who has government issued certificates

Manufacture

200pts

100pts

100pts

5pts

3pts

1pts

1pts

Skills Test: Three parts ( Physical strength,  experiences & interview,  Basic skills) constitute the test.

- Basic Skills Test: As the new tasks has been added to test one’s competency, candidates will select the sub category of each industry they were applying for.

· Manufacturing: Select one of categories as assemble, measures, join

- Physical Test: Physical examination on finger, disk, and color blindness will primarily be tested during the course of skills test.

Even if one with color blind took the test, the test will be null and void.

Score distribution

Industry

(Skills test)

Total score

Skills test

Physical strength

Interview

Basic skills

Manufacture

100

30

30

40

n  Things to be aware of

  1. Test date and venue for each applicant will be announced on July11, 2018 and please refer to the announcement on the date.
  2. You cannot change the designated test date and venue and no one is allowed to enter the venue after the designated entry time. No admittance to anyone arrives after the designated entry time.
  3. No admittance to anyone did not bring their Passport.
  4. If one haven’t chosen the sub category, it will randomly be chosen.
  5. We recommend you to pay special attention to your safety during the test. You are entirely responsible for any accidents caused by your negligence.
  6. The tools and equipment for the test will be prepared at the venue, so it is not required for applicant to bring any tools or equipment (except for a Passport and an admission ticket).
  7. It is recommended to wear comfortable and neat clothes that cause no inconvenience in the Skills Test.
  8. You will get zero point in case of cheating during the test. Dishonesty act includes, but not limited to cheating on an exam. Failure to maintain integrity on an exam will result in a loss of test taking chance for 3 years.
  9. Please check the contents of the Task Instructions, announced with this, and prepare to get good result from the test. 

- Relevant documents for competency test will be verified three times in the process of test period. If the documents submitted are proven to be falsified, test will be null and void and the person cant apply for EPS-TOPIK for 3 years.


Task Instructions for Skills Test 1/4

Interview

Test Duration: 4minutes

1. Basic Korean conversation

Introduce yourself and your strengths and job experience, career plans into Korean.

Example)

안녕하세요’ -> ‘안녕하세요
'Hello' -> ‘Hello’

etc.

2. Movement instructions
Answer Korean questions in proper Korean.
 

Example)

(왼손오른손양손)올리세요내리세요

Please raise, lower your (left hand, right hand, both hands)

etc

3. Name the Tools : 60 Images of Tools

Name the tools in Korean presented by instructor.

면접1 2

면접1 1

4. Definition of National competency standards

Abilities needed in most of the working environments are classified into ten categories to check the applicants’ performance abilities. In Skills test, the five categories among the ten categories will be evaluated through interview.

  1. 직장동료가바쁘면어떻게거예요How are you going to do if your colleagues very busy?
  2. 회사에일이많으면어떻게거예요How are you going to do if your company very busy?
  3. 1kg g입니까?(: 7km=700,000cm , 2=0.0002L) Calculate the proposed issue by proctor
  4. 일을하다실수하면어떻게거예요How are you going to do if you mistake on working?
  5. 한국에서사용할있는기술(자격증) 있어요Have you any skill, technical qualifications, etc. that you can use in Korea?

 

Guidelines for Applicants

You will be given a single opportunity to answer each question.

Your interview will be filmed and sent to business owners in Korea.

Every answer will be evaluated in terms of ability for speaking Korean.

 

Physical

Test Duration : 3minutes

Guidelines for Applicants

Warm up your body before assessment to prevent safety accidents.

If you fail to prepare for each item or perform each assessment item in the correct posture, you will receive the lowest marks.

Each assessment item can be taken only once.

1. Measuring grasping power

Measuring grasping power

Instructions

Stand up with feet opened as wide as your shoulders and arms lowered.

Face the gauge display towards the outside and grab the gauge with the second finger knuckles.

Keep your arms straight and make sure that the angle between each arm and body is 15 degrees.

Upon hearing the starting signal, pull it as strongly as possible for two to three seconds.

Perform the foregoing process once for each hand.

Precautions

     Use only hand power. Do not bend your arms or use your body.

     Do not make the measurement tool sway or touch your body during the test.

2. Measuring back strength

Measuring back strength

Instructions

Stand up on the measurement tool with the distance between both feet being around 15cm.

Bend upper body by around 30 degrees with knees and arms stretched, and grasp the handle correctly.

Make sure that the location of the handle is 10cm higher than your knees.

Upon hearing the starting signal, pull your upper body as strongly as possible and at the same time pull the handle for three seconds.

Implement this process once only.

Precautions

To prevent injuries, make sure that you do not bend your waist or back when pulling the measurement tool. Make sure that you pull the tool straight upwards so that it does not lose balance.

Those who have a back or waist injury or problem must not take this test.

3. Height & Weight Measurement

Height Weight Measurement

Instructions

Stand up on the measurement tool with the distance between both feet being around 15cm.

Bend upper body by around 30 degrees with knees and arms stretched, and grasp the handle correctly.

Implement this process once only.

Task Instructions for Skills Test 2/3

Test 1. Insert Pins [1min]

    Requirements

Considering the diagram, insert the pins in to the slate provided according to the color, size and shape.

 Diagram

Insert Pins

[Pin Board]

Test 2. Hang Items [1min]

Hang the rings on the rod according to size.

Requirements

Hang the rings on the rod according to size.

Diagram

Hang Items

Task Instructions for Skills Test 3/3

Test Duration   [sub category1: 1min 30sec, sub category 2~3: 2min

Sub category  1. Measures

Measure (Weigh) the given substances to the desired size (volume) designated by the instructor.

Requirements

Measure (Weigh) the given substances to the desired size (volume) designated by the instructor.

 Diagram

Measure

Instructions  

Identify the desired amount designated by the instructor and conduct the measuring task.

Complete the desired amount by using all three plastic mass cylinders (measuring cylinders) in different volumes just once per cylinder and raise your hand to notify your completion of the task to the instructor. When the instructor finishes the check, collect the amount in a measuring cylinder for collecting and wait to finish the marking (limited to once).

With a ruler, cut the given material into the instructed.Cut them into another length and after finishing the task raise your hand to inform the instructor of your completion of the task. 

Guideline for Applicants  

Take extra care to prevent any accidents. 

Follow the instructor’s signal to begin and end each session. If you perform the job before the test starts or after it ends, you will receive the lowest mark. 

Complete each task as quickly and precisely as possible. After completing a task, please raise your hand to inform the examiner of it. 

Perform the job promptly and accurately. Damaging testing tools using unnecessary force or action will result in the lowest mark.

If you fail to follow instructions or cause disorder, you may get expelled from the testing room. 

Be careful not to cause a safety accident by using units diagonally in an inappropriate posture. 

The measurement tasks will be evaluated based on the cm, gram, ml scale. So please be conscious of the fact.

For each measuring cylinder, you have just one chance to measure. If you do not observe this instruction, you will be given the lowest point.


Sub category 2.  Join

Requirements

Bind and stick the plywood to the indicated joint position accurately by using designated tools and parts and dismantle it in accordance with the instructor’s instructions.

Diagram

Join

Instructions

Attach the hinge to the indicated position as in the presented design in a limited time and being careful of the position and number of nails.

Please link the hinge and the plates, considering the 1mm gap between the plates.

Please be conscious of the fact that you will be given the lowest point if the plates couldn’t be folded after linking the hinge.

Disassemble and separate the unit in accordance with the instructor’s directions.

Be aware of the fact that you will be given the lowest point if the corresponding scale is more than 20mm.

Guideline for Applicants

Take extra care to prevent any accidents.

Follow the instructor’s signal to begin and end each session. If you perform the job before the test starts or after it ends, you will receive the lowest mark.

At the instructor’s signal to end the session, stop the job immediately and wait until your work is evaluated. After evaluation, return all testing tools to their original position for next applicants. (Disassemble and separate the joined screws.)

Complete each task as quickly and precisely as possible. After completing a task, please raise your hand to inform the examiner of it.

Perform the job promptly and accurately. Damaging testing tools using unnecessary force or action will result in the lowest mark.

If you fail to follow instructions or cause disorder, you may get expelled from the testing room.

Be careful not to cause a safety accident by using units diagonally in an inappropriate posture.

Be aware of the fact that you will be given the lowest point if there has been negligent accident.


Sub category 3.  Assemble

Requirements

In 2minutes, please tight two types of bolts and nuts accurately in the provided slate. After being checked by the proctor, In 1minutes, loosen the bond.

Diagram

Assemble

Instructions

Using appropriate tools, tight the provided bolts and nuts to the designated location carefully. The proctor will check the outcome of your performances.

Disassemble the joined bolts and nuts in accordance with the instructor’s directions.

Please be careful not to lose points by using too much pressure or damaging the tools for assessment.

Guideline for Applicants

Take extra care to prevent any accidents.

Follow the instructor’s signal to begin and end each session. If you perform the job before the test starts or after it ends, you will receive the lowest mark.

At the instructor’s signal to end the session, stop the job immediately and wait until your work is evaluated. After evaluation, return all testing tools to their original position for next applicants. (Disassemble and separate the joined bolts.)

Complete each task as quickly and precisely as possible. After completing a task, please raise your hand to inform the examiner of it.

Perform the job promptly and accurately. Damaging testing tools using unnecessary force or action will result in the lowest mark.

If you fail to follow instructions or cause disorder, you may get expelled from the testing room.

Make sure to wear safety gloves when carrying out the work and be careful not to cause a safety accident by using units diagonally in an inappropriate posture.

Please be aware of the fact that you will be given the lowest point, if you tight the bolts and nuts not by the provided tools but by the hands

 

 

 

Go to top

 © 1976- 2017, All rights reserved by Overseas Employment Corporation, Pakistan.